WM Jones rim

[47str8leg]

Getting a new tire for this rim.
English rim laced to a starhub.
A 3.00x18 was on it but I’d like to know the minimum to maximum tire it will fit so I have some choices.

Don’t know much about them so this is the pic of the numbers.

They look like WM 2.1o Jones 40 6080

T.I.A

Tim

[TriNortchopz]

WM2 rim, tire width options: 2.75 - 3.60

http://www.britishcycle.com/Manuals/Wheel_rim_tyre_sizes.pdf

https://www.central-wheel.co.uk/19-wm2-ajs-matchless-stainless-steel-wheel-rim-spokes-set-full-width-front-and-rear-included.html

[TriNortchopz]

Genuine Jones Highly Polished Alloy Front Rim WM2x19x40

https://www.classicbikepartscheshire.com/wheel-brake-c224/wheel-rims-c159

[47str8leg]

WM2 rim, tire width options: 2.75 - 3.60

http://www.britishcycle.com/Manuals/...tyre_sizes.pdf

I’m reading that as 2.75-3.10.

[TriNortchopz]

I’m reading that as 2.75-3.10.

from the explanation of the grey shading in the chart:

"Rim Width/Tyre Size Chart
This chart has been compiled from a number of tyre manufacturers charts to give an
overview of fitments possible, for more specific information contact your tyre
manufacturer.
The shaded area shows the possible rims for a tyre size including the recommended
fitment."

Note the sentence:
"...The shaded area shows the possible rims for a tyre size including the recommended
fitment."

2.75, 3.00 and 3.10 are the recommended fitting, listed as "STD",

while the rest of the grey shaded area "shows the possible rims for a tyre size..." including 3.25, 3.50 and 3.60.

http://www.britishcycle.com/Manuals/Wheel_rim_tyre_sizes.pdf